Skip to main content
APEC 2024 Main banner
Back
Technical Dialogue

D05 - Motor Drives & Inverters

Thursday, February 29, 2024
11:30 AM – 1:30 PM PST
Location: Grand Ballroom AB

Presentations:

  • 11:30 AM – 1:30 PM PST
    Robust Online Diagnosis of Inverter Open-Circuit Switching Faults for Robotic Joints with BLDC Motors

    Technical Dialogue Presenter: Mohamed Y. Metwly, MA (he/him/his) – University of Kentucky

  • 11:30 AM – 1:30 PM PST
    Hybrid Modulation Method for Single Phase Full Bridge CRM Inverter to Improve Reactive Power Capability

    Technical Dialogue Presenter: Xingyu Chen – CPES / Virginia Tech

  • 11:30 AM – 1:30 PM PST
    Online CEMF Estimation for Permanent Magnet Synchronous Motor

    Technical Dialogue Presenter: Bing Li, MSc (he/him/his) – Rockwell Automation

  • 11:30 AM – 1:30 PM PST
    Regenerative Active Front End Based Motor-Drive Systems for Servo Press Applications

    Technical Dialogue Presenter: Ahmed Sayed-Ahmed, PhD – Rockwell Automation

  • 11:30 AM – 1:30 PM PST
    Fast-Response FCS-MPC for Coordinated Control of Permanent Magnet Direct-Drive Motors in Humanoid Robotic Arm Shoulders

    Technical Dialogue Presenter: Cheng Xue, PhD (he/him/his) – University of Alberta

  • 11:30 AM – 1:30 PM PST
    Frequency-Dependent Impedance Variation in Multilevel Converters with Parallel Connectivity

    Technical Dialogue Presenter: Jinshui Zhang – Duke University

  • 11:30 AM – 1:30 PM PST
    Low THD Current Control of Nonlinear Load Characteristics Using a Single Phase Dual Zeta Inverter

    Technical Dialogue Presenter: Benjamin Zacher

  • 11:30 AM – 1:30 PM PST
    Multisampling Model Predictive Control for PMSM Drives with Improved Tracking Performance and High Bandwidth

    Technical Dialogue Presenter: Cheng Xue, PhD (he/him/his) – University of Alberta

  • 11:30 AM – 1:30 PM PST
    Speed-Increasing Type Reluctance Vernier Machine

    Technical Dialogue Presenter: Kimio Hijikata, PhD (he/him/his) – Tokyo City University

  • 11:30 AM – 1:30 PM PST
    Efficiency Enhancement and Current Stress Reduction in ARCP Inverter Through Switching Sequence Dependent Control Strategy

    Technical Dialogue Presenter: Mingi Oh – NC state university

  • 11:30 AM – 1:30 PM PST
    Broken Rotor Bar Detection in AC Induction Motors Using Cascaded Flux-Current State Observer

    Technical Dialogue Presenter: Woongkul Lee – Michigan State University

  • 11:30 AM – 1:30 PM PST
    MPC-Based Fault-Tolerant Control of Asymmetrical Six-Phase PMSM Motor With Robust Voltage Vector Calibration

    Technical Dialogue Presenter: Yixiao Luo, PhD – Huazhong University of Science and Technology

  • 11:30 AM – 1:30 PM PST
    Regenerative dV/dt Filter Topology for Motor Drives

    Technical Dialogue Presenter: Yilmaz Sozer, PhD – University of Akron

  • 11:30 AM – 1:30 PM PST
    Mitigation of Uneven Overvoltage Distribution in Motor Windings Fed by SiC-Based Drives Using a GaN-Based Adaptive Surge Impedance Method

    Technical Dialogue Presenter: Behrooz Mirafzal – Kansas State University

  • 11:30 AM – 1:30 PM PST
    A Rotor Flux Observer for SPMSM Sensorless Drive Based on Linear Regression Model

    Technical Dialogue Presenter: Jongwon Choi, PhD – Hannam University

  • 11:30 AM – 1:30 PM PST
    A TMR-Based Integrated Current Sensing Solution for WBG Power Modules

    Technical Dialogue Presenter: Sama Salehi Vala, PhD – Stony Brook University

  • 11:30 AM – 1:30 PM PST
    Comparison of Flux-Weakening Control Methods for Wound Field Synchronous Motor

    Technical Dialogue Presenter: Han-Vit Kim, MS – Dankook University