Skip to main content
APEC 2024 Main banner
Back
Technical Dialogue

D07 - Power Converter Design, Packaging & Integration

Thursday, February 29, 2024
11:30 AM – 1:30 PM PST
Location: Grand Ballroom AB

Presentations:

  • 11:30 AM – 1:30 PM PST
    Power Control and Sensing Method of kW Range Class E Power Amplifier

    Technical Dialogue Presenter: Kyungmin Lee, PhD – Samsung electronics

  • 11:30 AM – 1:30 PM PST
    Low Inductance Package with Multi-Layer PCB Wiring for Double-Sided Direct Oil-Cooling Inverter

    Technical Dialogue Presenter: Kyota Asai, MA – Hitachi, Ltd.

  • 11:30 AM – 1:30 PM PST
    A Screening Method for Improving Transient Current Sharing of Paralleled SiC MOSFETs Based on Spectral Clustering

    Technical Dialogue Presenter: Junhui Yang, MA (he/him/his) – Xi'an Jiaotong University

  • 11:30 AM – 1:30 PM PST
    Operation Point Based Optimization of Switching Losses with Current-Source Gate Driver for SiC-Based Power Modules

    Technical Dialogue Presenter: Syed Hadiuzzaman

  • 11:30 AM – 1:30 PM PST
    Design of Zero Overvoltage Switching Tailored Power Electronics

    Technical Dialogue Presenter: Adrian Amler, M.Sc. – Friedrich-Alexander-Universität Erlangen-Nürnberg

  • 11:30 AM – 1:30 PM PST
    A ΔIIN Self-Canceled SEPIC Power Converter for EMI CISPR 25 Compliance

    Technical Dialogue Presenter: Zhenda Fu, MS (he/him/his) – The University of Texas at Dallas

  • 11:30 AM – 1:30 PM PST
    Common-Mode Noise Reduction in Full-Bridge LLC Resonant Converter with Split Primary Winding Transformer

    Technical Dialogue Presenter: Yan-Fei Liu – Queens University

  • 11:30 AM – 1:30 PM PST
    Parasitic Inductance Network Modeling Method for Power Module Inner Wirings Based on Inductance Matrix Measurement

    Technical Dialogue Presenter: Kotaro Kobashi (he/him/his) – Okayama University

  • 11:30 AM – 1:30 PM PST
    Difference in Differential and Common Mode Currents of Output and Input Cables in Three-Phase Variable Speed Drive System for Evaluating Radiated EMI

    Technical Dialogue Presenter: Tuvshinbayar Bandi, PhD – Kyushu Institute of Technology

  • 11:30 AM – 1:30 PM PST
    Simultaneous Measurement System of Differential Mode and Common Mode Currents Without Influence for Radiated EMI in Three-Phase Variable Speed Drive System

    Technical Dialogue Presenter: Fumiya Odera, MS – YASKAWA Electric Corporation

  • 11:30 AM – 1:30 PM PST
    A High-Reliability SiC-Based Power Module with High-Temperature Co-Fired Ceramic Interposer for High-Temperature Applications

    Technical Dialogue Presenter: Baihan Liu, PhD – Huazhong University of Science and Technology

  • 11:30 AM – 1:30 PM PST
    A Comprehensive Study on Electric Field Coupling Effects of Medium-Voltage SiC Power Module and Optimization Design

    Technical Dialogue Presenter: Peiyuan Sun, BE – Xi'an Jiaotong University

  • 11:30 AM – 1:30 PM PST
    Cost Effective 3D Printed Heatsink for Fast Prototyping of WBG Power Converters

    Technical Dialogue Presenter: Stefano Savio (he/him/his) – Politecnico di Torino

  • 11:30 AM – 1:30 PM PST
    Methods for Increasing the Partial Discharge Inception Voltage of Power Module Substrates Using Guard Ring Structures

    Technical Dialogue Presenter: Yuan Gao, PhD – Aalborg University

  • 11:30 AM – 1:30 PM PST
    A Jet Impingement Cooling Method to Mitigate the Inherent Uneven Temperature of Multi-Chips in Power Modules

    Technical Dialogue Presenter: Xiaobo Dong, PhD – Xi'an Jiaotong University

  • 11:30 AM – 1:30 PM PST
    A Compact Power Stage Design for 10-kV SiC Device-Based Converters with Heatsink Electric Field Shaping

    Technical Dialogue Presenter: Zihan Gao, MS – the University of Tennessee

  • 11:30 AM – 1:30 PM PST
    Common-Mode Voltage in Three-Level T-Type Inverter: Modeling, Analysis, and Compensation

    Technical Dialogue Presenter: Vefa Karakaşlı, M.Sc – Technische Universität Darmstadt

  • 11:30 AM – 1:30 PM PST
    An Improved Thermal Matrix Model of a Forced-Cooled Heat Sink Considering Uneven Cooling Conditions

    Technical Dialogue Presenter: Linhao Ren (he/him/his) – Huazhong University of Science and Technology